Quote:
Originally Posted by drez
Hello, I've bought several 2011 mechanized companies from the Yugoslavian (Serbia and Montenegro) OOB which makes use of the M-80 series ICV. This is great, but if I choose to use the M-80 as my ICV and I wish to use 82mm mortars then there is a problem because the mortars do not fit into the ICV! Perhaps in a future update you can make it so the mortars use a different transport when you purchase an entire mech company?
cheers,
drez
EDIT*** OK a little more delving and I can say that the both the 81mm and the 82mm mortars simply do not fit in the M-80 series ICVs. Should the M-80's increase their carry capacity or should they just not be an option for the mortars?
|
The formation probably needs looking at, since it seems to have a battalion's worth of medium mortars (6 tubes) - at company level.
The mech mortar platoon is trying to fit a 2 tube
section in each of 3xAPC. The OOB probably needs a single mortar element for that formation (3x1x60mms?). And most likely, would be in light/medium trucks (since I don't see a 7 man IFV (which the later ones are) being used simply as a carrier for dismounted mortar teams).
Much the same could be said of all the other formations - the leg companies have 2x3 60mm for example. It likely should only be a single 3x60mm mortar section element.
Probably, an previous OOB designer thought the mortars were singles, not sections of 2 or 3 tubes per element?.
Cheers
Andy
Yugoslav OOB
Linear Mode
