OT: Net Work Advise Sought

Atrocities · #1 September 16th, 2003, 10:36 AM

I am having my Cable modem re-hooked back up for a trial period that I quallified for as a long time customer who cancelled service and I have two PC's that I need to have access to the web via the modem.

One runs Win2k, the primary system, and the other runs Millenium. What will I need to do to run both of these PC's off of only one IP?

I have a D-Link 5 slot hub and cables. No router and no knowledge past that. I am thinking perhpas wireless networking if its cheep enough.

The Mil OS computer is just a back up PC but will be ran from time to time doing back ups and it will need net access.

Any help or advise is welcome and appreciated.

Thanks.

rdouglass · #2 September 16th, 2003, 05:04 PM

FYI: I just purchased a wireless router and PC Card bundle from TigerDirect for $75 and am quite pleased - DLink brand and 22MBps - 802.11b support. Using it in the office.

I also bought a DLink 'wired' router for home for $40 (same place) and is a very solid product IMO - NAT, VPN support, firewall, Virtual Server support, etc. I am currently supporting 5 PC's off a single cable connection without any noticeable difference. Quite a feature list for the money actually...

I know $40 can be difficult to come by sometimes, but IMO its well worth the money compared to all the other issues without one.

Just my $.02...

Atrocities · #3 September 16th, 2003, 09:04 PM

Thanks guys.

I appreciate the help and insight.

Suicide Junkie · #4 September 17th, 2003, 01:36 AM

A router would be simplest.
Just plug the cable modem in, and run cables between everything.
Power on in order from modem to router to computers, and it will just work.

If the old PC dosen't go Online very often, you could call up tech support, have them clear your ARP, and then plug the old PC into the modem.
Then switch back, calling tech support again.

You could pay $5 or $10 a month for a second IP address.

You could get a second network card, and do some internet sharing from either PC to the other.

If you were on DSL, Sympatico gives you two IPs by default, but add any more and you'll need one of the above steps.

A router will be your best (simple, added security, long-term) solution, if you have some cash around. They're not too expensive anymore. Built in firewall, NAT, and if you ever fill the router, you can add the hub to split off to more computers.
With a wireless router, you'll probably not get as many ethernet ports, but it'll be enough for your setup, and you can always add the hub downstream of the router to get more.

Cheapest would be to call tech support and get them to clear the settings each time you want to switch computers.
After a few times, they'll know you, and it'll take under 30 seconds once they answer the phone.

[ September 16, 2003, 12:39: Message edited by: Suicide Junkie ]