Retroseries?
In short, it is a way to speed up production at the cost of spending more money.
For your basic ships of the line, you should not need it; rather, have enough planetary and orbital yards to use up all your resources as fast as you get them dug up.
Retroseries are good for super-emergency-build effects, and special items.
A good example is a Battlemoon, or Sphereworld component bases...
First build a stripped down Version that takes a minimum of time to complete on your spaceyards.
If your basic design takes exactly 2 or 3 turns to complete, you will get your finished product into service the fastest.
If your basic design takes only 1 turn to build, you can get more ships out per turn on average, but you will have a longer delay before the first one is spaceworthy.
Once you have a stripped down design that can be built quickly, COPY that design, and add components until the TOTAL cost in all three resources COMBINED is close to 150% of the original's cost.
Note that the costs are combined!
1000 minerals +400 organics +100 rads is 150% the cost of a 0 minerals, 0 organics, 1000 rads cost design, and CAN be retrofitted to!
As your Spaceyards rapidly build the stripped down designs, retrofit each one as it completes to the 150% cost design.
The yards will repair these ships while they build the next stripped down Version.
A retroseries involves chaining many designs together;
- Basic
- Retro 1 (50% more)
- Retro 2 (50% more than R1) 2.25x more than basic
- Retro 3 (50% more than R2) 3.375x more than basic
- ...
- Retro 9 (50% more than R8) 38.4x more than basic
- Final (50% more than R9) 57x more than Basic!
So, in a simultaneous game, if the Basic Design cost you 2 turns of building to make, +10 turns to retrofit to each retroseries design in turn, you get:
A super-huge ship that would have taken 114 TURNS in only 12 turns plus repair time!
Not to mention you get your second ship off the line on turn 14 instead of turn 228 (!)
This is an extreme example, but it does apply to Battlemoons and Sphereworld components.
To a lesser extent, it can also apply to warships.
The key is that, when money is not an issue, you CAN speed up your production by throwing money at the problem
For a Battleship that takes 5 turns to complete at an orbital yard, we can design a basic hull that costs only 1/5th that amount and builds in 1 turn.
It will take a 4 step retroseries to get the basic hull to the final design (since (1.5)^4 = 5.0625)
By turn #5, the regular yard strategy will leave you with one finished battleship.
By turn #5, the retroseries yard has:
- 1 Final-design battleship, with many damaged components
- 1 R3 design battleship
- 1 R2 design battleship
- 1 R1 design battleship
- 1 Basic design battleship
Not worth it yet, but just wait!
By turn #10, the regular yard has completed 2 full battleships.
The retroseries yard now has:
- 6 Final Design battleships
- 1 R3 design battleship
- 1 R2 design battleship
- 1 R1 design battleship
- 1 Basic design battleship
Assuming you have the repair capacity to keep up with the volume of ships (a single repair base should be more than sufficient)
With the retro-strategy yard, you now have 3x as many finished battleships, and are pumping them out 5x faster than normal!
So,
if you have the money, but not the build rate, retroseries may be for you!
[ January 27, 2003, 02:05: Message edited by: Suicide Junkie ]
retro-multi-model construction???
Asteroids Champion!
Linear Mode
