New ICON BMPS

SGTGunn · #1 November 9th, 2006, 01:58 PM

Hi,

I've attached a Zipped folder of all of the various new Icon BMPs I've come up with over the past year. It's a mix of historical units, experimental units, hypothetical units, and some Hammer's Slammers Sci-Fi Stuff =)

I plan on putting together a complete group of OOB and SHP files for these Icons and hope to post them here soon (right now they're all over the place in my OOB/SHPs).

Let me know what you think.

Thanks,

Adrian Gunn

thatguy96 · #2 November 9th, 2006, 07:24 PM

Wow, the ATC icon is a lot better than mine. From the looks of it you used the new LCM icons from WinSPWWII to make it. That, and the CCB, the scaled up monitor, and the PACV all look great.

I guess the next question is could I use these in my pack?

SGTGunn · #3 November 9th, 2006, 07:51 PM

Thanks!

You're correct - I used the SPWWII LCM6 icon as a base for the ATC. I scaled the exisiting Monitor Icon so it was the same size as the LCM6, then did a bit of cutting and pasting to incorporate the LCM's well deck with the Monitor to get the ATC. I replaced the old Monitor Icon with the scaled up one to keep the ATC and Monitor to scale with each other. The CCB is simply the scaled up monitor with the mortar pit & canvas cover removed and decked over.

"I guess the next question is could I use these in my pack?"

Sure, be my guest!

Adrian

thatguy96 · #4 November 10th, 2006, 12:04 AM

Thanks, you'll be credited of course. I also took the liberty of adding the cover for the cargo area from my icon to yours to create more of an effect like seen here.

This was the result:

SGTGunn · #5 November 15th, 2006, 11:32 AM

Here's an ATC with Helo Pad as seen here.

SGTGunn · #6 November 15th, 2006, 01:32 PM

Hi,

Here's a new PBR Mk. 2 Icon, as seen here.

The PBR Mk. II was normally armed with twin M2 .50 Cal HMG in a forward turret, a single M2 .50 Cal HMG pintle mounted aft, and either one Mk 18 40mm AGL and one M60 7.62mm MMG or two M60 7.62mm MMG amidships.

Adrian

SGTGunn · #7 November 15th, 2006, 02:26 PM

I've redone the CCB Icon again - I had forgoten to add the communications shelter aft of the 40mm turret.

Here is the corrected image.

Adrian

SGTGunn · #8 November 15th, 2006, 04:40 PM

Here's some more icons:

LCM (6) ATC "Zippo" (use M132 Turret)

Monitor "Zippo" hull (use 40mm Turret)

Monitor Hull (Use any Monitor Turret)

Monitor LVTH6 105mm Turret

Monitor LVTH6 105mm Turret with Bar Armor

Monitor 40mm Turret with Bar Armor

M132 "Zippo" (use M132 Turret)

M132 "Zippo" Turret

Adrian